Airworthiness Directive · Amendment 39-22741 · Electrical power
Airbus SAS Airplanes
This AD applies to all Airbus SAS airplanes identified in paragraphs (c)(1) through (14) of this AD, certificated in any category.
(1) Model A300 B4-2C, B4-103, and B4-203 airplanes.
(2) Model A300 B4-601, B4-603, B4-620, and B4-622 airplanes.
(3) Model A300 B4-605R and B4-622R airplanes.
(4) Model A300 C4-605R variant F airplanes.
(5) Model A300 F4-605R and F4-622R airplanes.
(6) Model A310-203, -204, -221, -222, -304, -322, -324, and -325 airplanes.
(7) Model A318-111, -112, -121, and -122 airplanes.
(8) Model A319-111, -112, -113, -114, -115, -131, -132, -133, -151N, -153N, and -171N airplanes.
(9) Model A320-211, -212, -214, -216, -231, -232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes.
(10) Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -251NX, -252N, -252NX, -253N, -253NX, -271N, -271NX, -272N, and -272NX airplanes.
(11) Model A330-201, -202, -203, -223, -223F, -243, -243F, -301, -302, -303, -321, -322, -323, -341, -342, -343, -841, and -941 airplanes.
(12) Model A340-211, -212, -213, -311, -312, -313, -541, and -642 airplanes.
(13) Model A350-941 and A350-1041 airplanes.
(14) Model A380-841, -842, and -861 airplanes.
The FAA is superseding Airworthiness Directive (AD) 2021-20- 08, which applied to certain Airbus SAS Model A318, A319, A320, A321, A330-200, A330-200 Freighter, A330-300, A330-800, A330-900, A340-200, A340-300, A340-500, A340-600, and A380-800 series airplanes. AD 2021- 20-08 required replacing certain nickel-cadmium (Ni-Cd) batteries with serviceable Ni-Cd batteries. This AD was prompted by a report that repetitive disconnection and reconnection of certain Ni-Cd batteries during airplane parking or storage could lead to a reduction in capacity of those batteries. This AD adds airplanes to the applicability and requires replacement of certain affected parts with serviceable parts as a precondition for return to service of airplanes from storage or parking, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2023-0196, dated November 10, 2023 (EASA AD 2023-0196).
(1) Where EASA AD 2023-0196 refers to its effective date, this AD requires using the effective date of this AD.
(2) This AD does not adopt the “Remarks” section of EASA AD 2023-0196.
(3) The compliance for the replacement specified in paragraph (1) of EASA 2023-0196 is at the time specified in paragraph (1) of EASA AD 2023-0196, or within 30 days after the effective date of this AD, whichever occurs later.
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, mail it to the address identified in paragraph (k) of this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or Airbus SAS's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.
(3) Required for Compliance (RC): Except as required by paragraph (i)(2) of this AD, if any service information referenced in EASA AD 2023-0196 that contains paragraphs that are labeled as RC, the instructions in RC paragraphs, including subparagraphs under an RC paragraph, must be done to comply with this AD; any paragraphs, including subparagraphs under those paragraphs, that are not identified as RC are recommended. The instructions in paragraphs, including subparagraphs under those paragraphs, not identified as RC may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC, provided the instructions identified as RC can be done and the airplane can be put back in an airworthy condition. Any substitutions or changes to instructions identified as RC require approval of an AMOC.
For more information about this AD, contact Dan Rodina, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 206-231-3225; email dan.rodina@faa.gov.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
