Airworthiness Directive · Amendment 39-22353 · Time limits/maintenance checks
Airbus SAS Airplanes
Superseded. A later AD replaced this one: AD 2024-19-13. Comply with the one in force.
This AD applies to the Airbus SAS airplanes specified in paragraphs (c)(1) through (4) of this AD, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued on or before February 18, 2022.
(1) Model A318-111, -112, -121, and -122 airplanes.
(2) Model A319-111, -112, -113, -114, -115, -131, -132, -133, -151N, -153N, and -171N airplanes.
(3) Model A320-211, -212, -214, -216, -231, -232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes.
(4) Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, -271NX, and -272NX airplanes.
The FAA is superseding Airworthiness Directive (AD) 2020-22- 16, AD 2021-16-01, and AD 2022-04-03, which applied to certain Airbus SAS Model A318, A320, and A321 series airplanes; and Model A319-111, - 112, -113, -114, -115, -131, -132, -133, -151N, and -153N airplanes. AD 2020-22-16, AD 2021-16-01, and AD 2022-04-03 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require the actions in AD 2020-22-16, AD 2021-16-01, and AD 2022-04-03, and also requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
This paragraph restates the requirements of paragraph (i) of AD 2020-22-16, with no changes. For airplanes with an original airworthiness certificate or original export certificate of airworthiness issued on or before January 17, 2020, except for Model A319-171N airplanes: Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2020-0067, dated March 23, 2020 (EASA AD 2020-0067). Accomplishing the revision of the existing maintenance or inspection program required by paragraph (o) of this AD terminates the requirements of this paragraph.
This paragraph restates the exceptions specified in paragraph (j) of AD 2020-22-16, with no changes.
(1) The requirements specified in paragraphs (1) and (2) of EASA AD 2020-0067 do not apply to this AD.
(2) Paragraph (3) of EASA AD 2020-0067 specifies revising “the AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, to incorporate the “tasks and associated thresholds and intervals” specified in paragraph (3) of EASA AD 2020-0067 within 90 days after December 10, 2020 (the effective date of AD 2020-22-16).
(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2020-0067 is at the applicable “associated thresholds” specified in paragraph (3) of EASA AD 2020-0067, or within 90 days after December 10, 2020 (the effective date of AD 2020-22-16), whichever occurs later.
(4) The provisions specified in paragraphs (4) and (5) of EASA AD 2020-0067 do not apply to this AD.
(5) The “Remarks” section of EASA AD 2020-0067 does not apply to this AD.
This paragraph restates the requirements of paragraph (k) of AD 2020-22-16, with a new exception. Except as required by paragraph (o) of this AD, after the maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2020-0067.
This paragraph restates the requirements of paragraph (g) of AD 2021-16-01, with no changes. For airplanes with an original airworthiness certificate or original export certificate of airworthiness issued on or before June 10, 2020, except for Model A319-171N airplanes: Revise the existing maintenance or inspection program, as applicable, by incorporating task(s) and associated thresholds and intervals specified in paragraph (3) of EASA AD 2020-0219, dated October 12, 2020 (EASA AD 2020-0219), except you are required to incorporate task(s) and associated thresholds and intervals within 90 days after September 28, 2021 (the effective date of AD 2021-16-01). Record a compliance time for the initial tasks of either the applicable “thresholds” incorporated by the requirements of paragraph (3) of EASA AD 2020-0219 or 90 days after September 28, 2021 (the effective date of AD 2021-16-01), whichever would occur later. Accomplishing the revision of the existing maintenance or inspection program required by paragraph (o) of this AD terminates the requirements of this paragraph.
This paragraph restates the requirements of paragraph (h) of AD 2021-16-01, with a new exception. Except as required by paragraph (o) of this AD, after the existing maintenance or inspection program has been revised as required by paragraph (j) of this AD, no alternative actions (e.g., inspections) and intervals are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2020-0219.
This paragraph restates the requirements of paragraph (g) of AD 2022-04-03, with no changes. For airplanes with an original airworthiness certificate or original export certificate of airworthiness issued on or before December 9, 2020, except for Model A319-171N airplanes: Except as specified in paragraph (m) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2021-0108, dated April 20, 2021 (EASA AD 2021-0108). Accomplishing the revision of the existing maintenance or inspection program required by paragraph (o) of this AD terminates the requirements of this paragraph.
This paragraph restates the exceptions specified in paragraph (h) of AD 2022-04-03, with no changes.
(1) Where EASA AD 2021-0108 refers to its effective date, this AD requires using March 30, 2022 (the effective date of AD 2022-04-03).
(2) The requirements specified in paragraphs (1) and (2) of EASA AD 2021-0108 do not apply to this AD.
(3) Paragraph (3) of EASA AD 2021-0108 specifies revising “the approved AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after March 30, 2022 (the effective date of AD 2022-04-03).
(4) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2021-0108 is at the applicable “thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2021-0108, or within 90 days after March 30, 2022 (the effective date of AD 2022-04-03), whichever occurs later.
(5) The provisions specified in paragraphs (4) of EASA AD 2021-0108 do not apply to this AD.
(6) The “Remarks” section of EASA AD 2021-0108 does not apply to this AD.
This paragraph restates the requirements of paragraph (i) of AD 2022-04-03, with a new exception. Except as required by paragraph (o) of this AD, after the existing maintenance or inspection program has been revised as required by paragraph (l) of this AD, no alternative actions (e.g., inspections) and intervals are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2021-0108.
Except as specified in paragraph (p) of this AD: Comply with all required actions and compliance times specified in, and in accordance with EASA AD 2022-0091, dated May 20, 2022 (EASA AD 2022-0091). Accomplishing the revision of the existing maintenance or inspection program required by this paragraph terminates the requirements of paragraphs (g), (j), and (l) of this AD.
(1) The requirements specified in paragraphs (1) and (2) of EASA AD 2022-0091 do not apply to this AD.
(2) Paragraph (3) of EASA AD 2022-0091 specifies revising “the approved AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.
(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2022-0091 is at the applicable “associated thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2022-0091, or within 90 days after the effective date of this AD, whichever occurs later.
(4) The provisions specified in paragraphs (4) and (5) of EASA AD 2022-0091 do not apply to this AD.
(5) This AD does not adopt the “Remarks” section of EASA AD 2022-0091.
After the existing maintenance or inspection program has been revised as required by paragraph (o) of this AD, no alternative actions (e.g., inspections) and intervals are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2022-0091.
(1) Accomplishing the actions required by paragraph (j) of this AD terminates the corresponding requirements of AD 2020-22-16, for the tasks identified in the service information referred to in EASA AD 2020-0219 only.
(2) Accomplishing the actions required by paragraph (l) of this AD terminates the limitations of Task 262300-00001-1-C, as required by paragraph (i) of AD 2020-22-16, for airplanes with an original airworthiness certificate or original export certificate of airworthiness issued on or before January 17, 2020 only.
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the International Validation Branch, send it to the attention of the person identified in paragraph (t) of this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or Airbus SAS's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.
For more information about this AD, contact Vladimir Ulyanov, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; telephone 206-231-3229; email Vladimir.Ulyanov@faa.gov.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
