Airworthiness Directive · Amendment 39-22272 · Time limits/maintenance checks
ATR-GIE Avions de Transport Régional Airplanes
Superseded. A later AD replaced this one: AD 2023-10-08. Comply with the one in force.
This AD applies to all ATR-GIE Avions de Transport Régional Model ATR42-200, -300, and -320 airplanes, certificated in any category.
The FAA is superseding Airworthiness Directive (AD) 2018-18- 05, which applied to certain ATR-GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes; and AD 2020- 09-16, which applied to all ATR-GIE Avions de Transport R[eacute]gional Model ATR42-200, -300, and -320 airplanes. AD 2018-18-05 and AD 2020- 09-16 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD is prompted by a determination that additional new or more restrictive airworthiness limitations are necessary. This AD retains the requirements of AD 2020-09-16. This AD also requires revising the existing maintenance or inspection program, as applicable, to incorporate additional new or more restrictive maintenance requirements and airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This paragraph restates the requirements of paragraph (g) of AD 2020-09-16, with a new terminating action. Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2019-0256, dated October 17, 2019 (EASA AD 2019-0256). Accomplishing the revision of the existing maintenance or inspection program required by paragraph (j) of this AD terminates the requirements of this paragraph.
This paragraph restates the exceptions specified in paragraph (h) of AD 2020-09-16, with no changes.
(1) The requirements specified in paragraphs (1) and (3) of EASA AD 2019-0256 do not apply to this AD.
(2) Where paragraph (2) of EASA AD 2019-0256 refers to its effective date, this AD requires using June 22, 2020 (the effective date of AD 2020-09-16).
(3) Paragraph (4) of EASA AD 2019-0256 specifies revising “the approved AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, to incorporate the “limitations, tasks and associated thresholds and intervals” specified in paragraph (4) of EASA AD 2019-0256 within 90 days after June 22, 2020 (the effective date of AD 2020-09-16).
(4) The initial compliance time for doing the tasks specified in paragraph (4) of EASA AD 2019-0256 is at the applicable “associated thresholds” specified in paragraph (4) of EASA AD 2019-0256, or within 90 days after June 22, 2020 (the effective date of AD 2020-09-16), whichever occurs later.
(5) The provisions specified in paragraphs (5) and (6) of EASA AD 2019-0256 do not apply to this AD.
(6) This AD does not adopt the “Remarks” section of EASA AD 2019-0256.
This paragraph restates the requirements of paragraph (i) of AD 2020-09-16, with a new exception. Except as required by paragraph (j) of this AD, after the existing maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections), intervals, and CDCCLs are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2019-0256.
Except as specified in paragraph (k) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2022-0062, dated April 8, 2022 (EASA AD 2022-0062). Accomplishing the revision of the existing maintenance or inspection program required by this paragraph terminates the requirements of paragraph (g) of this AD.
(1) The requirements specified in paragraph (1) and (2) of EASA AD 2022-0062 do not apply to this AD.
(2) Paragraph (3) of EASA AD 2022-0062 specifies revising “the approved AMP” within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.
(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2022-0062 is at the applicable “limitations” and “associated thresholds” as incorporated by the requirements of paragraph (3) of EASA AD 2022-0062, or within 90 days after the effective date of this AD, whichever occurs later.
(4) The provisions specified in paragraphs (4) and (5) of EASA AD 2022-0062 do not apply to this AD.
(5) This AD does not adopt the “Remarks” section of EASA AD 2022-0062.
After the existing maintenance or inspection program has been revised as required by paragraph (j) of this AD, no alternative actions (e.g., inspections), intervals, and CDCCLs are allowed unless they are approved as specified in the provisions of the “Ref. Publications” section of EASA AD 2022-0062.
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the International Validation Branch, send it to the attention of the person identified in paragraph (n) of this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or ATR-GIE Avions de Transport Régional's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.
For more information about this AD, contact Shahram Daneshmandi, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; telephone 206-231-3220; email shahram.daneshmandi@faa.gov.
