Airworthiness Directive · Amendment 39-21733 · Equipment/furnishings
The Boeing Company Airplanes
This AD applies to The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes, certificated in any category, as identified in Boeing Special Attention Service Bulletin 777-25-0649, Revision 2, dated October 8, 2020.
The FAA is superseding Airworthiness Directive (AD) 2019-01- 08, which applied to certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. AD 2019-01-08 required modifications for galley mounted attendant seat fittings. This AD was prompted by a report that showed a non-compliance exists on some in-service galley attendant seat fitting installations, and a determination that additional airplanes are subject to the unsafe condition. This AD requires modifications for galley mounted attendant seat fittings. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified by paragraph (h) of this AD: At the applicable times specified in paragraph 1.E., “Compliance,” of Boeing Special Attention Service Bulletin 777-25-0649, Revision 2, dated October 8, 2020, do all applicable actions identified as “RC” (required for compliance) in, and in accordance with, the Accomplishment Instructions of Boeing Special Attention Service Bulletin 777-25-0649, Revision 2, dated October 8, 2020.
Where Boeing Special Attention Service Bulletin 777-25-0649, Revision 2, dated October 8, 2020, uses the phrase “the Revision 2 date of this service bulletin,” this AD requires using “the effective date of this AD.”
Although the service information referenced in Boeing Special Attention Service Bulletin 777-25-0649, Revision 2, dated October 8, 2020, specifies to submit certain information to the manufacturer, this AD does not include that requirement.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
