Airworthiness Directive · Amendment 39-21605 · Fuel system
Airbus SAS Airplanes
This AD applies to all Airbus SAS airplanes, certificated in any category, specified in paragraphs (c)(1) through (5) of this AD.
(1) Model A330-201, -202, -203, -223, and -243 airplanes.
(2) Model A330-223F and -243F airplanes.
(3) Model A330-301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes.
(4) Model A340-211, -212, and -213 airplanes.
(5) Model A340-311, -312, and -313 airplanes.
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200, A330-200 Freighter, A330-300, A340-200, and A340-300 series airplanes. This AD was prompted by a report that the auxiliary power unit (APU) aft fuel pump printed circuit board (PCB) varnish had deteriorated; the varnish is one of the layers of protection against development of an ignition source. This AD requires replacing each affected APU aft fuel pump, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2020-0265, dated December 2, 2020 (EASA AD 2020-0265).
(1) Where EASA AD 2020-0265 refers to its effective date, this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2020-0265 does not apply to this AD.
Although the service information referenced in EASA AD 2020-0265 specifies to submit certain information to the manufacturer, this AD does not include that requirement.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
