Airworthiness Directive · Amendment 39-21385 · Landing gear
Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
This AD applies to all Saab AB, Support and Services Model SAAB 2000 airplanes, certificated in any category.
The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model SAAB 2000 airplanes. This AD was prompted by a report of inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the main landing gear (MLG) wheel axles. This AD requires an inspection for correct installation of the MLG anti-skid system harnesses and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2020-0137, dated June 18, 2020 (EASA AD 2020-0137).
(1) Where EASA AD 2020-0137 refers to its effective date, this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2020-0137 does not apply to this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
