Airworthiness Directive · Amendment 39-21282 · Landing gear
Airbus SAS Airplanes
This AD applies to all the Airbus SAS airplanes identified in paragraphs (c)(1) through (4) of this AD, certificated in any category.
(1) Model A318-111, -112, -121, and -122 airplanes.
(2) Model A319-111, -112, -113, -114, -115, -131, -132, -133, -151N, -153N, and -171N airplanes.
(3) Model A320-211, -212, -214, -216, -231, -232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes.
(4) Airbus SAS Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, -271NX, and -272NX airplanes.
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to all Airbus SAS Model A318 series airplanes; Model A319 series airplanes; Model A320 series airplanes; and Model A321 series airplanes. As published, a paragraph reference located in the reporting exception is incorrect. This document corrects that error. In all other respects, the original document remains the same.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2020-0193, dated September 7, 2020 (EASA AD 2020-0193).
(1) Where EASA AD 2020-0193 refers to its effective date, this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2020-0193 does not apply to this AD.
(3) Paragraph (3) of EASA AD 2020-0193 specifies to report inspection results to Airbus within a certain compliance time. For this AD, report inspection results at the applicable time specified in paragraph (h)(3)(i) or (ii) of this AD.
(i) If the inspection was done on or after the effective date of this AD: Submit the report within 15 days after the inspection.
(ii) If the inspection was done before the effective date of this AD: Submit the report within 15 days after the effective date of this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
