Airworthiness Directive · Amendment 39-21268 · Turbine engine combustion section
General Electric Company Turbofan Engines
This AD applies to General Electric Company GEnx-1B64, -1B64/P1, -1B64/P2, -1B67, -1B67/P1, -1B67P2, -1B70, -1B70/75/P1, -1B70/75/P2, -1B70/P1, -1B70/P2, -1B70C/P1, -1B70C/P2, -1B74/75/P1, -1B74/75/P2, -1B76/P2, and -1B76A/P2 model turbofan engines.
The FAA is adopting a new airworthiness directive (AD) for all General Electric Company (GE) GEnx-1B64, -1B64/P1, -1B64/P2, -1B67, - 1B67/P1, -1B67P2, -1B70, -1B70/75/P1, -1B70/75/P2, -1B70/P1, -1B70/P2, -1B70C/P1, -1B70C/P2, -1B74/75/P1, -1B74/75/P2, -1B76/P2, and -1B76A/P2 model turbofan engines. This AD was prompted by reports of combustor case burn-through. This AD requires installation of electronic engine control (EEC) software, version B205 or later. The FAA is issuing this AD to address the unsafe condition on these products.
Within 120 days after the effective date of this AD, install electronic engine control (EEC) software that is eligible for installation.
For the purpose of this AD, EEC software that is eligible for installation is EEC software that is version B205 or later.
