Airworthiness Directive · Amendment 39-21244 · Fuselage
Airbus SAS Airplanes
This AD applies to the Airbus SAS airplanes specified in paragraphs (c)(1) through (4) of this AD, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2020-0019, dated February 5, 2020 (“EASA AD 2020-0019”).
(1) Model A318-111, -112, -121, and -122 airplanes.
(2) Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes.
(3) Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes.
(4) Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes.
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, - 113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. This AD was prompted by reports of crack findings in and around the fastener holes of the central and lateral window frame upper junction; those cracks were found on fastener holes outside of the inspection area specified in a certain airworthiness limitation item (ALI) task. This AD requires repetitive inspections of the upper junction fastener holes at the lateral window frame for cracking; and for certain airplanes, repetitive inspections of the spotface around the fastener holes for cracking; and corrective actions if necessary; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2020-0019.
(1) Where EASA AD 2020-0019 refers to its effective date, this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2020-0019 does not apply to this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
