Airworthiness Directive · Amendment 39-21227 · Fuselage
Airbus SAS Airplanes
This AD applies to Airbus SAS Model airplanes specified in paragraphs (c)(1) through (4) of this AD, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2020-0037, dated February 27, 2020; corrected February 28, 2020 (“EASA AD 2020-0037”).
(1) Model A318-111, -112, -121, and -122 airplanes.
(2) Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes.
(3) Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes.
(4) Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes.
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, - 113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, - 131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by a report that cracks were detected on the left-hand (LH) and right- hand (RH) sides of the first rivet hole of the frame (FR) 43 foot coupling during scheduled maintenance. This AD requires a rotating probe test of the fastener holes at FR43 on the LH and RH sides for any cracking, and on-condition actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2020-0037.
(1) Where EASA AD 2020-0037 refers to its effective date, this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2020-0037 does not apply to this AD.
Although the service information referenced in EASA AD 2020-0037 specifies to submit certain information to the manufacturer, this AD does not include that requirement.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
