Airworthiness Directive · Amendment 39-21180 · Indicating/recording system
Sikorsky Aircraft Corporation Helicopters
This AD applies to Sikorsky Aircraft Corporation Model S-76C helicopters, certificated in any category, equipped with remote data acquisition unit (RDAU) part number 76450-01098-106, 76450-01098-107, or 76450-01098-109.
The FAA is adopting a new airworthiness directive (AD) for certain Sikorsky Aircraft Corporation Model S-76C helicopters. This AD was prompted by reports of inaccurate main gear box (MGB) indications in flight. This AD requires updating the remote data acquisition unit (RDAU) software and re-identifying the RDAU and, for certain helicopters, updating the software of the display unit (DU) and re- identifying the DU. The FAA is issuing this AD to address the unsafe condition on these products.
Within 500 hours time-in-service after the effective date of this AD, do the actions specified in paragraphs (g)(1) through (4) of this AD, as applicable to your helicopter.
(1) For helicopters equipped with RDAU part number 76450-01098-109, update the RDAU software and re-identify the RDAU in accordance with Section 3., Paragraphs A. through J. of the Accomplishment Instructions of Sikorsky Alert Service Bulletin 76-31-3, Revision B, dated June 26, 2018, except you are not required to return the RDAU to Parker Fluid Systems Division (FSD).
(2) For helicopters equipped with RDAU part number 76450-01098-107, update the RDAU software and re-identify the RDAU in accordance with Section 3., Paragraphs A. through J. of the Accomplishment Instructions of Sikorsky Alert Service Bulletin 76-31-4, Revision A, dated May 30, 2018, except you are not required to return the RDAU to Parker FSD.
(3) For helicopters equipped with RDAU part number 76450-01098-106, update the RDAU software and re-identify the RDAU in accordance with Section 3., Paragraphs A. through K. of the Accomplishment Instructions of Sikorsky Alert Service Bulletin 76-31-5, dated July 31, 2018, except you are not required to return the RDAU to Parker FSD.
(4) For helicopters equipped with RDAU part number 76450-01098-106, update the software of DU part number 76450-01098-101 and re-identify the DU as part number 76450-01098-108, in accordance with Section 3., Paragraphs A. through J. of the Accomplishment Instructions of Sikorsky Service Bulletin 76-006, Revision A, dated August 23, 2018, except you are not required to return the DU to Parker FSD.
As of the effective date of this AD, no person may install, on any helicopter, a DU part number 76450-01098-101, unless it has been modified in accordance with the requirements of paragraph (g)(4) of this AD.
At the applicable time specified in paragraph (i)(1) or (2) of this AD, submit a report of compliance with the actions specified in paragraphs (g)(1) through (4) of this AD, as applicable to your helicopter. The report must include the document number and title of the service information used, the owner and/or operator of the helicopter, the submitter's name, date, and the helicopter serial number. Submit the report to Sikorsky Aircraft Corporation in accordance with Section 3., Paragraph A. (Record of Compliance) of the Accomplishment Instructions of Sikorsky Alert Service Bulletin 76-31-3, Revision B, dated June 26, 2018; Section 3., Paragraph L. of the Accomplishment Instructions of Sikorsky Alert Service Bulletin 76-31-4, Revision A, dated May 30, 2018; Section 3., Paragraph M. of the Accomplishment Instructions of Sikorsky Alert Service Bulletin 76-31-5, dated July 31, 2018; or Section 3., Paragraph L. of the Accomplishment Instructions of Sikorsky Service Bulletin 76-006, Revision A, dated August 23, 2018, as applicable to your helicopter.
(1) If the action was done on or after the effective date of this AD: Submit the report within 30 days after the inspection.
(2) If the action was done before the effective date of this AD: Submit the report within 30 days after the effective date of this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.