Airworthiness Directive · Amendment 39-19909 · Time limits/maintenance checks
328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
This AD applies to all 328 Support Services GmbH (Type Certificate previously held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Model 328-300 airplanes, certificated in any category.
The FAA is adopting a new airworthiness directive (AD) for all 328 Support Services GmbH Model 328-300 airplanes. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2019-0271, dated October 30, 2019 (“EASA AD 2019-0271”).
(1) The requirements specified in paragraphs (1) and (2) of EASA AD 2019-0271 do not apply to this AD.
(2) Where paragraph (3) of EASA AD 2019-0271 specifies a compliance time of “Within 12 months” after its effective date to “revise the approved AMP,” this AD requires “revising the existing maintenance or inspection program, as applicable,” to incorporate the “limitations, tasks and associated thresholds and intervals,” specified in paragraph (3) of EASA AD 2019-0271 within 90 days after the effective date of this AD.
(3) The initial compliance time for doing the tasks specified in paragraph (3) of EASA AD 2019-0271 is at the applicable “associated thresholds” specified in paragraph (3) of EASA AD 2019-0271, or within 90 days after the effective date of this AD, whichever occurs later.
(4) The provisions specified in paragraphs (4) and (5) of EASA AD 2019-0271 do not apply to this AD.
(5) The “Remarks” section of EASA AD 2019-0271 does not apply to this AD.
After the existing maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections), intervals, and CDCCLs are allowed except as specified in the provisions of the “Ref. Publications” section of EASA AD 2019-0271.
(1) Accomplishing the maintenance or inspection program revision required by paragraph (g) of this AD terminates all requirements of AD 2009-01-06 R1.
(2) Accomplishing the maintenance or inspection program revision required by paragraph (g) of this AD terminates all requirements of AD 2012-01-08 for Model 328-300 airplanes only.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
