Airworthiness Directive · Amendment 39-19869 · Electric and electronic common installation
Airbus SAS Airplanes
This AD applies to Airbus SAS Model A319-112, -115, and -132 airplanes; and Model A320-214, -216, -232 and -233 airplanes; certificated in any category; as identified in European Union Aviation Safety Agency (EASA) AD 2019-0227, dated September 11, 2019 (“EASA AD 2019-0227”).
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A319-112, -115, and -132 airplanes; and Model A320-214, -216, -232, and -233 airplanes. This AD was prompted by a report that a possible interference was identified between 1M and 2M wiring harnesses and the tapping units, and that the interference could adversely affect the lavatory smoke detection system and/or the passenger oxygen system. This AD requires modifying the 1M and 2M harness routing, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2019-0227.
(1) For purposes of determining compliance with the requirements of this AD: Where EASA AD 2019-0227 refers to its effective date, this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2019-0227 does not apply to this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
