Airworthiness Directive · Amendment 39-19854 · Doors
Airbus SAS Airplanes
This AD applies to all Airbus SAS Model A350-941 and -1041 airplanes, certificated in any category.
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This AD was prompted by reports of passenger door girt bar fitting assembly safety hooks being stuck in the upward position. This AD requires repetitive detailed inspections of girt bar fitting assemblies, repetitive greasing of girt bar fitting assembly bushes, and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2019-0207, dated August 22, 2019 (“EASA AD 2019-0207”).
(1) Where EASA AD 2019-0207 refers to its effective date, this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2019-0207 does not apply to this AD.
(3) Paragraph (4) of EASA AD 2019-0207 specifies to report inspection results to Airbus within a certain compliance time. For this AD, report inspection results at the applicable time specified in paragraph (h)(3)(i) or (ii) of this AD.
(i) If the inspection was done on or after the effective date of this AD: Submit the report within 90 days after the conclusion of the maintenance visit or check where the inspection was completed.
(ii) If the inspection was done before the effective date of this AD: Submit the report within 90 days after the effective date of this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
