Airworthiness Directive · Amendment 39-19508 · Time limits/maintenance checks
Airbus SAS Airplanes
Superseded. A later AD replaced this one: AD 2022-18-14. Comply with the one in force.
This AD applies to the Airbus SAS airplanes specified in paragraphs (c)(1), (c)(2), and (c)(3) of this AD, certificated in any category, with an original certificate of airworthiness or original export certificate of airworthiness issued on or before November 22, 2017.
(1) Model A330-223F and -243F airplanes.
(2) Model A330-201, -202, -203, -223, and -243 airplanes.
(3) Model A330-301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes.
We are adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200 Freighter, A330-200, and A330-300 series airplanes. This AD was prompted by a revision of a certain airworthiness limitations item (ALI) document, which specifies new or more restrictive maintenance instructions and airworthiness limitations, and a determination that those maintenance instructions and airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance instructions and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.
Within 90 days after the effective date of this AD, revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 2—Damage Tolerant Airworthiness Limitation Items (DT-ALI), Revision 02, Issue 2, dated November 22, 2017. The initial compliance time for accomplishing the tasks is at the applicable times specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 2—Damage Tolerant Airworthiness Limitation Items (DT-ALI), Revision 02, Issue 2, dated November 22, 2017, or within 90 days after the effective date of this AD, whichever occurs later.
After the existing maintenance or inspection program has been revised, as required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (j)(1) of this AD.
Accomplishing the action required by paragraph (g) of this AD terminates all requirements of AD 2017-19-13.
