Airworthiness Directive · Amendment 39-19470 · Engine fuel distribution
General Electric Company Turbofan Engines
This AD applies to General Electric Company (GE) GEnx-2B67, -2B67B, and -2B67/P turbofan engines with top main fuel manifolds, part numbers (P/Ns) 2419M11G01, 2561M11G01, or 2546M11G01, or lower fuel manifolds, P/Ns 2419M12G01, 2561M12G01, or 2546M12G01, installed.
We are adopting a new airworthiness directive (AD) for certain General Electric Company (GE) GEnx-2B67, -2B67B, and -2B67/P turbofan engines. This AD was prompted by low-cycle fatigue (LCF) cracking of the fuel manifold leading to an engine fire. This AD requires removal from service of certain fuel manifolds at the next engine shop visit and their replacement with parts eligible for installation. We are issuing this AD to address the unsafe condition on these products.
At the next engine shop visit, remove the applicable fuel manifolds from service and replace with parts eligible for installation.
After the effective date of this AD, do not install top main fuel manifolds, P/Ns 2419M11G01, 2561M11G01, or 2546M11G01, or lower fuel manifolds, P/Ns 2419M12G01, 2561M12G01, or 2546M12G01.
For the purpose of this AD, an “engine shop visit” is the induction of an engine into the shop for maintenance involving the separation of pairs of major mating engine case flanges, except for the following situations, which do not constitute an engine shop visit:
(1) Separation of engine flanges solely for the purposes of transportation of the engine without subsequent maintenance.
(2) Separation of engine flanges solely for the purposes of replacing the fan or propulsor without subsequent maintenance.
