Airworthiness Directive · Amendment 39-19428 · Time limits/maintenance checks
Dassault Aviation Airplanes
Superseded. A later AD replaced this one: AD 2020-04-22. Comply with the one in force.
This AD applies to Dassault Aviation Model FALCON 2000EX airplanes, certificated in any category, with an original certificate of airworthiness or original export certificate of airworthiness issued on or before January 15, 2018.
We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 2000EX airplanes. This AD was prompted by the manufacturer revising the airplane maintenance manual (AMM) maintenance requirements and airworthiness limitations. This AD requires revising the maintenance or inspection program, as applicable, to incorporate new maintenance requirements and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.
Within 90 days after the effective date of this AD, revise the maintenance or inspection program, as applicable, to incorporate the information specified in Chapter 5-40, Airworthiness Limitations, DGT 113877, Revision 11, dated November 2017, of the Dassault Falcon 2000EX Maintenance Manual. The initial compliance times for doing the tasks are at the time specified in Chapter 5-40, Airworthiness Limitations, DGT 113877, Revision 11, dated November 2017, of the Dassault Falcon 2000EX Maintenance Manual, or within 90 days after the effective date of this AD, whichever occurs later; except for task number 52-20-00-610-801-01, the initial compliance time is within 24 months after October 8, 2014 (the effective date of AD 2014-16-12). The term “LDG” in the “First Inspection” column of any table in Chapter 5-40, Airworthiness Limitations, DGT 113877, Revision 11, dated November 2017, means total airplane landings. The term “FH” in the “First Inspection” column of any table in Chapter 5-40, Airworthiness Limitations, DGT 113877, Revision 11, dated November 2017, means total flight hours. The term “FC” in the “First Inspection” column of any table in Chapter 5-40, Airworthiness Limitations, DGT 113877, Revision 11, dated November 2017, means total flight cycles.
After the maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (j)(1) of this AD.
(1) Accomplishing the actions required by paragraph (g) of this AD terminates all of the requirements of AD 2014-16-12.
(2) Accomplishing the actions specified in paragraph (g) of this AD terminates the requirements of paragraph (g) of AD 2010-26-05 for Dassault Aviation Model FALCON 2000EX airplanes.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
