Airworthiness Directive · Amendment 39-19344 · Time limits/maintenance checks
Airbus SAS Airplanes
Superseded. A later AD replaced this one: AD 2020-21-10. Comply with the one in force.
This AD applies to the Airbus SAS airplanes identified in paragraphs (c)(1) through (c)(4) of this AD, certificated in any category, with an original certificate of airworthiness or original export certificate of airworthiness issued on or before April 6, 2017.
(1) Model A318-111, -112, -121, and -122 airplanes.
(2) Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes.
(3) Model A320-211, -212, -214, -216, -231, -232, -233, -251N, and -271N airplanes.
(4) Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -253N, and-271N airplanes.
We are adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318, A319, and A320 series airplanes, and Model A321- 111, -112, -131, -211, -212, -213, -231, -232, -251N, -253N, and -271N airplanes. This AD was prompted by a revision of an airworthiness limitations document that specifies more restrictive maintenance requirements and airworthiness limitations. This AD requires revising the maintenance or inspection program, as applicable, to incorporate the specified maintenance requirements and airworthiness limitations. We are issuing this AD to address the unsafe condition on these products.
Within 90 days after the effective date of this AD, revise the maintenance or inspection program, as applicable, to incorporate Airbus SAS A318/A319/A320/A321 Airworthiness Limitations Section (ALS) Part 4, “System Equipment Maintenance Requirements (SEMR),” Revision 05, dated April 6, 2017. The initial compliance time for doing the revised actions is at the applicable time specified in Airbus SAS A318/A319/A320/A321 ALS Part 4, “System Equipment Maintenance Requirements (SEMR),” Revision 05, dated April 6, 2017.
After the maintenance or inspection program has been revised as required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions and intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (j)(1) of this AD.
Accomplishing the actions required by this AD terminates all requirements of AD 2017-19-24.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
