Airworthiness Directive · Amendment 39-19336 · Turbine/turboprop engine--turbine section
General Electric Company Turbofan Engines
Superseded. A later AD replaced this one: AD 2020-20-13. Comply with the one in force.
This AD applies to General Electric Company (GE) CF6-80A, CF6-80A1, CF6-80A2, CF6-80A3, CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5, CF6-80C2A5F, CF6-80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B2, CF6-80C2B2F, CF6-80C2B4, CF6-80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6-80C2B6FA, CF6-80C2B7F, CF6-80C2D1F, CF6-80C2L1F, and CF6-80C2K1F turbofan engines with high-pressure turbine (HPT) disks with serial numbers listed in Table 1 and 2 of Appendix A in GE CF6-80C2 Service Bulletin (SB) 72-1562 R03, dated January 10, 2018; and Table 1 of Appendix A in GE CF6-80A SB 72-0869 R01, dated October 19, 2017.
We are adopting a new airworthiness directive (AD) for certain General Electric Company (GE) CF6-80A, CF6-80A1, CF6-80A2, CF6-80A3, CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5, CF6-80C2A5F, CF6- 80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B2, CF6-80C2B2F, CF6-80C2B4, CF6-80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6-80C2B6FA, CF6- 80C2B7F, CF6-80C2D1F, CF6-80C2L1F, and CF6-80C2K1F turbofan engines. This AD was prompted by an uncontained failure of a high-pressure turbine (HPT) stage 2 disk that resulted in a fire. This AD requires ultrasonic inspection (UI) of HPT stage 1 and 2 disks. We are issuing this AD to address the unsafe condition on these products.
After the effective date of this AD, perform an ultrasonic inspection (UI) for cracks in HPT stage 1 and stage 2 disks on the CF6-80C2 turbofan engine and in HPT stage 2 disks on the CF6-80A turbofan engine at each piece-part level exposure in accordance with the Accomplishment Instructions, paragraph 3.A.(2), in GE CF6-80C2 SB 72-1562 R03, dated January 10, 2018, or the Accomplishment Instructions, paragraph 3.A.(2) in GE CF6-80A SB 72-0869 R01, dated October 19, 2017, as applicable to the engine model.
The reporting requirements specified in the Accomplishment Instructions, paragraphs 3.A.(2)(c) and 3.A.(2)(f), of GE CF6-80C2 SB 72-1562 R03, dated January 10, 2018, are not required by this AD.
For the purpose of this AD, “piece-part exposure” of the HPT stage 1 or stage 2 disk is separation of that HPT disk from its mating rotor parts within the HPT rotor module (thermal shield and HPT stage 1 and stage 2 disk respectively).
