Airworthiness Directive · Amendment 39-19150 · Doors
Fokker Services B.V. Airplanes
This AD applies to Fokker Services B.V. Model F28 Mark 0100 series airplanes, certificated in any category, serial numbers 11244 through 11267 inclusive, 11284, 11285, 11287, 11288, 11290, 11292, 11294, 11296, 11298, 11299, 11301, 11302, 11304, 11305, 11307, 11309, 11311, 11315, 11317, 11319, 11320, 11322, 11336, 11339, 11341 through 11344 inclusive, 11347, 11348, 11350, 11351, 11362 through 11364 inclusive, 11371, 11374, 11375, 11381 through 11384 inclusive, 11386, 11389, 11390, 11394, and 11401.
We are superseding Airworthiness Directive (AD) 95-25-02, which applied to certain Fokker Services B.V. Model F28 Mark 0100 airplanes. AD 95-25-02 required inspection(s) to detect cracks of the fuselage-mounted half of hinge assemblies of the small cargo door, and replacement of any cracked hinge assembly with a new hinge assembly. This new AD was prompted by a report that the hinges of the small cargo door are made of a material that is sensitive to stress corrosion and fatigue cracking, and by the determination that the existing inspection program does not provide sufficient protection against fatigue-induced cracks. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. We are issuing this AD to address the unsafe condition on these products.
Within 30 days after the effective date of this AD, request instructions from the Manager, International Section, Transport Standards Branch, FAA, to address the unsafe condition specified in paragraph (e) of this AD; and accomplish the action(s) at the times specified in, and in accordance with, those instructions. Guidance can be found in Mandatory Continuing Airworthiness Information (MCAI) European Aviation Safety Agency (EASA) AD 2013-0028, dated February 8, 2013.
