Airworthiness Directive · Amendment 39-19054 · Time limits/maintenance checks
Airbus Airplanes
Superseded. A later AD replaced this one: AD 2020-21-10. Comply with the one in force.
This AD applies to the Airbus airplanes identified in paragraphs (c)(1), (c)(2), (c)(3), and (c)(4) of this AD; certificated in any category; with an original certificate of airworthiness or original export certificate of airworthiness issued on or before December 21, 2015.
(1) Model A318-111, -112, -121, and -122 airplanes.
(2) Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes.
(3) Model A320-211, -212, -214, -231, -232, and -233 airplanes.
(4) Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes.
We are superseding Airworthiness Directive (AD) 2014-26-10, which applied to all Airbus Model A318, A319, A320, and A321 series airplanes. AD 2014-26-10 required revising the maintenance or inspection program to incorporate maintenance requirements and airworthiness limitations. This new AD requires revising the maintenance or inspection program, as applicable, to incorporate new or revised airworthiness limitation requirements. This AD was prompted by a determination that more restrictive maintenance instructions and airworthiness limitations are necessary. We are issuing this AD to address the unsafe condition on these products.
This paragraph restates the requirements of paragraph (g) of AD 2014-26-10, with new reference to terminating action. Within 30 days after February 25, 2015 (the effective date of AD 2014-26-10): Revise the maintenance or inspection program, as applicable, to incorporate Airbus A318/A319/A320/A321 Airworthiness Limitations Section, ALS Part 4, “Aging Systems Maintenance,” Revision 01, dated June 15, 2012. The initial compliance time for doing the actions is at the applicable time specified in Airbus A318/A319/A320/A321 Airworthiness Limitations Section, ALS Part 4, “Aging Systems Maintenance,” Revision 01, dated June 15, 2012; or within 2 weeks after revising the maintenance or inspection program; whichever occurs later. Accomplishing the actions specified in paragraph (i) of this AD terminates the requirements of this paragraph.
This paragraph restates the requirements of paragraph (h) of AD 2014-26-10, with a new paragraph reference. Except as required by paragraph (i) of this AD, after accomplishment of the revision required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (k)(1) of this AD.
Within 30 days after the effective date of this AD: Revise the maintenance or inspection program, as applicable, to incorporate Airbus A318/A319/A320/A321 Airworthiness Limitations Section (ALS) Part 4, “System Equipment Maintenance Requirements (SEMR),” Revision 03 at Issue 02, dated January 22, 2016. The initial compliance time for doing the actions is at the applicable time specified in Airbus A318/A319/A320/A321 Airworthiness Limitations Section, ALS Part 4, “System Equipment Maintenance Requirements (SEMR),” Revision 03 at Issue 02, dated January 22, 2016; or within 2 weeks after revising the maintenance or inspection program; whichever occurs later. Accomplishing the actions specified in this paragraph terminates the requirements of paragraph (g) of this AD.
After the action required by paragraph (i) of this AD has been done, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an AMOC in accordance with the procedures specified in paragraph (k)(1) of this AD.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
