Airworthiness Directive · Amendment 39-18904 · Turbine/turboprop engine, turbine section
Rolls-Royce Corporation Turbofan Engines
(1) This AD applies to Rolls-Royce Corporation (RRC) AE 3007C and 3007C1 turbofan engines with 1st stage high-pressure turbine (HPT) wheels, part number (P/N) 23062373, 23065891, or 23070664; or with 2nd stage HPT wheels, P/N 23063462, 23065892, 23069116, 23069592 (except those serial numbers (S/Ns) noted in paragraph (c)(2) of this AD), or 23074643, installed.
(2) This AD does not apply to RRC AE 3007C and 3007C1 turbofan engines with 2nd stage HPT wheels, P/N 23069592, with S/Ns listed in Table 6 of RRC Alert Service Bulletin (ASB) AE 3007C-A-72-318, Revision 2, dated September 23, 2016, installed.
We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Corporation (RRC) AE 3007C and 3007C1 turbofan engines. This AD was prompted by analysis and by cracks found in the high- pressure turbine (HPT) wheel during an inspection. This AD requires replacement of the affected HPT wheels at new, lower life limits. We are issuing this AD to correct the unsafe condition on these products.
(1) For all RRC AE 3007C or C1 engines with an installed 1st stage HPT wheel, P/N 23062373, 23065891, or 23070664, or 2nd stage HPT wheel, P/N 23063462, 23065892, 23069116, 23069592 (except those S/Ns excluded by paragraph (c)(2) of this AD) or 23074643, after the effective date of this AD, remove the affected wheels before exceeding the new life limits identified in paragraph C., Table 1 of RRC ASB AE 3007C-A-72-318, Revision 2, dated September 23, 2016.
(2) After the effective date of this AD, do not return to service any engine with an HPT turbine wheel, with an affected P/N and an S/N, with a wheel life that exceeds the new life limits identified in paragraph C., Table 1 of RRC ASB AE 3007C-A-72-318, Revision 2, dated September 23, 2016.
