Airworthiness Directive · Amendment 39-18773 · Doors
Airbus Airplanes
Superseded. A later AD replaced this one: AD 2017-24-03. Comply with the one in force.
This AD applies to Airbus Model A319-115, A319-132, A320-214, A320-232, A321-211, A321-213, and A321-231 airplanes, certificated in any category, as identified in Airbus Service Bulletin A320-52-1167, dated August 6, 2015.
We are adopting a new airworthiness directive (AD) for certain Airbus Model A319-115, A319-132, A320-214, A320-232, A321-211, A321- 213, and A321-231 airplanes. This AD was prompted by a report of certain tie rod assemblies installed on the hinged fairing assembly of the main landing gear (MLG) with no cadmium plating on the rod end threads. This AD requires inspection and replacement of certain tie rod assemblies installed on the hinged fairing assembly of the MLG. We are issuing this AD to address the unsafe condition on these products.
Within 80 months after the airplane's first flight, do a detailed inspection of each tie rod assembly having a part number (P/N) D52840212000 or D52840212002 at the MLG hinged fairing for the presence of cadmium plating (gold colored threads), in accordance with the Accomplishment Instructions of Airbus Service Bulletin A320-52-1167, dated August 6, 2015. If during the inspection any tie rod assembly is found that does not have cadmium plating, before further flight, replace the tie rod assembly with a serviceable part having the same part number and cadmium plating, in accordance with the Accomplishment Instructions of Airbus Service Bulletin A320-52-1167, dated August 6, 2015.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
