Airworthiness Directive · Amendment 39-18765 · Fuselage
The Boeing Company Airplanes
This AD applies to The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes, certificated in any category, as identified in Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015.
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the nose wheel well is subject to widespread fatigue damage (WFD). This AD requires modification, inspections, and corrective actions of the nose wheel body structure. We are issuing this AD to address the unsafe condition on these products.
For groups 1 and 4 airplanes as identified in Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015: Except as required by paragraph (j)(1) of this AD, at the applicable time specified in paragraph 1.E., “Compliance,” of Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015, modify the nose wheel body structure, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015.
For groups 1 and 4 airplanes on which the actions of paragraph (g) have been done: Except as required by paragraph (j)(1) of this AD, at the applicable time specified in paragraph 1.E., “Compliance,” of Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015, do a detailed inspection of the nose wheel body structure for any cracking; do a surface high frequency eddy current inspection (HFEC) or an open hole HFEC inspection of the vertical beam outer chord and web for any cracking; and do all applicable related investigative, other specified actions, and corrective actions, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015; except as required by paragraph (j)(2) of this AD. Do all applicable related investigative actions, other specified actions, and corrective actions before further flight. Repeat the detailed inspection of the nose wheel body structure, and either the surface HFEC or the open hole HFEC inspection of the vertical beam outer chord, thereafter, at the applicable interval specified in paragraph 1.E., “Compliance,” of Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015.
For groups 2, 3, 5 and 6 airplanes identified in Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015: Except as required by paragraph (j)(1) of this AD, at the applicable time specified in paragraph 1.E., “Compliance,” of Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015, do a detailed inspection of the nose wheel well body structure for any cracking, and do all applicable related investigative and corrective actions, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015; except as required by paragraph (j)(2) of this AD. Do all related investigative and corrective actions before further flight. Repeat the detailed inspection thereafter at the applicable intervals specified in paragraph 1.E., “Compliance,” of Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015.
(1) Where Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015, specifies a compliance time “after the original issue date of this service bulletin,” this AD requires compliance within the specified compliance time after the effective date of this AD.
(2) If any crack is found during any inspection required by this AD, and Boeing Alert Service Bulletin 747-53A2887, dated December 2, 2015, specifies to contact Boeing for appropriate action, and specifies that action as “RC” (Required for Compliance): Before further flight, repair using a method approved in accordance with the procedures specified in paragraph (k) of this AD.
