Airworthiness Directive · Amendment 39-18763 · Periodic inspections
Airbus Airplanes
Superseded. A later AD replaced this one: AD 2022-16-07. Comply with the one in force.
This AD applies to Airbus Model A330-201, -202, -203, -223, -223F -243, -243F, -301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes, certificated in any category, with an original certificate of airworthiness or original export certificate of airworthiness issued on or before October 19, 2015.
We are superseding Airworthiness Directive (AD) 2014-26-08, for all Airbus Model A330-200, -200F, and -300 series airplanes. AD 2014-26-08 required revising the maintenance or inspection program to incorporate new maintenance requirements and airworthiness limitations. This new AD requires revising the maintenance or inspection program, as applicable, to incorporate new or revised airworthiness limitation requirements. This new AD also removes certain airplanes from the applicability. This AD was prompted by a determination that more restrictive maintenance instructions and airworthiness limitations are necessary. We are issuing this AD to address the unsafe condition on these products.
This paragraph restates the requirements of paragraph (k) of AD 2014-26-08, with no changes.
(1) Within 90 days after March 2, 2015 (the effective date of AD 2014-26-08): Revise the maintenance or inspection program, as applicable, to incorporate Airbus A330 Airworthiness Limitations Section ALS Part 3—Certification Maintenance Requirements, Revision 04, dated August 27, 2013. Within the applicable compliance time defined in the “Record of Revisions” section of Airbus A330 Airworthiness Limitations Section ALS Part 3—Certification Maintenance Requirements, Revision 04, dated August 27, 2013, except as provided by paragraph (g)(2) of this AD, accomplish all applicable maintenance tasks. Accomplishing the actions specified in paragraph (i) of this AD terminates the requirements of this paragraph.
(2) Where paragraph 3 of the “Record of Revisions” section of Airbus A330 Airworthiness Limitations Section ALS Part 3—Certification Maintenance Requirements, Revision 04, dated August 27, 2013, specifies accomplishing the actions “from 27 August 2013,” this AD requires compliance within the specified compliance time after March 2, 2015 (the effective date of AD 2014-26-08).
This paragraph restates the requirements of paragraph (l) of AD 2014-26-08, with no changes. After accomplishment of the action required by paragraph (g)(1) of this AD, no alternative inspections or inspection intervals may be used, other than those specified in Airbus A330 Airworthiness Limitations Section ALS Part 3—Certification Maintenance Requirements, Revision 04, dated August 27, 2013, except as provided by paragraphs (g)(2) and (i) of this AD, unless the inspections or intervals are approved as an AMOC in accordance with the procedures specified in paragraph (k)(1) of this AD.
Within 90 days after the effective date of this AD: Revise the maintenance or inspection program, as applicable, to incorporate Airbus A330 Airworthiness Limitations Section ALS Part 3—Certification Maintenance Requirements, Revision 05, dated October 19, 2015. Accomplishing the actions specified in this paragraph terminates the requirements of paragraph (g) of this AD.
After the action required by paragraph (i) of this AD has been done, no alternative inspections or inspection intervals may be used, other than those specified in Airbus A330 Airworthiness Limitations Section ALS Part 3—Certification Maintenance Requirements, Revision 05, dated October 19, 2015, unless the inspections or intervals are approved as an AMOC in accordance with the procedures specified in paragraph (k)(1) of this AD.
