Airworthiness Directive · Amendment 39-18648 · Honeywell International Inc. Turboprop and Turboshaft Engines
Honeywell International Inc. Turboprop and Turboshaft Engines
This AD applies to Honeywell International Inc. (Honeywell) TPE331-3U, -3UW, -5, -5A, -5AB, -5B, -6, -6A, -8, -10, -10AV, -10GP, -10GT, -10N, -10P, -10R, -10T, -10U, -10UA, -10UF, -10UG, -10UGR, -10UR, and -11U model turboprop engines, and TSE331-3U model turboshaft engines, with a 2nd stage compressor impeller, part number (P/N) 893482-1 through -5, inclusive, or P/N 3107056-1 or P/N 3107056-2, installed.
We are adopting a new airworthiness directive (AD) for certain Honeywell International Inc. (Honeywell) TPE331 model turboprop engines and TSE331-3U model turboshaft engines. This AD was prompted by the discovery of cracks in a 2nd stage compressor impeller during a routine shop visit. This AD requires removal of the 2nd stage compressor impeller. We are issuing this AD to prevent failure of the compressor impeller, uncontained part release, damage to the engine, and damage to the airplane.
(1) Remove from service the 2nd stage compressor impeller at next removal of the 2nd stage compressor impeller from the engine or before exceeding 11,500 cycles in service after the effective date of this AD, whichever occurs first.
(2) Reserved.
After the effective date of this AD, do not install a 2nd stage compressor impeller, part number (P/N) 893482-1 through -5, inclusive, or P/N 3107056-1 or P/N 3107056-2, into any engine.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
