Airworthiness Directive · Amendment 39-18022 · Landing gear
Bombardier, Inc. Airplanes
Superseded. A later AD replaced this one: AD 2017-04-02. Comply with the one in force.
This AD applies to Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, certificated in any category, serial numbers 7003 and subsequent.
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by a report indicating that inboard and outboard hydraulic lines of the brakes were found connected to the incorrect ports on the swivel assembly of the main landing gear (MLG). This AD requires modifying the MLG by installing a new bracket on the left and right lower aft-wing planks. We are issuing this AD to prevent incorrect installation of the brake hydraulic lines, which could cause the brakes and the anti-skid system to operate incorrectly, and consequent catastrophic failure of the airplane during a high-speed rejected takeoff.
Within 6,600 flight hours after the effective date of this AD, but no later than 36 months after the effective date of this AD: Modify the MLG by installing a new bracket on the left and right lower aft-wing planks, in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 601R-32-110, dated December 19, 2013.
