Airworthiness Directive · Amendment 39-17689 · Wings
Diamond Aircraft Industries GmbH Airplanes
Superseded. A later AD replaced this one: AD 2014-13-08. Comply with the one in force.
This AD applies to Diamond Aircraft Industries Model DA 40 airplanes, serial numbers 40.006 through 40.009, 40.011 through 40.1071, and 40.1073 through 40.1077; and Model DA 40 F airplanes, serial numbers 40.FC001 through 40.FC029; certificated in any category.
We are adopting a new airworthiness directive (AD) for Diamond Aircraft Industries GmbH Models DA40 and DA40F airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as fatigue strength found in the aft main spar does not ensure unlimited lifetime structural integrity. We are issuing this AD to require actions to address the unsafe condition on these products.
Unless already done, at or before the next Major Structural Inspection (MSI) after the effective date of this AD or within the next 114 months after January 7, 2014 (the effective date of this AD), whichever occurs first, modify the aft main spar in the cabin area following the INSTRUCTIONS section of Diamond Aircraft Industries GmbH Work Instructions WI-MSB 40-074, WI-MSB D4-094, and WI-MSB F4-028 (co-published as a single document), dated May 10, 2013, as specified in Diamond Aircraft Industries GmbH Mandatory Service Bulletins (MSB) 40-074, D4-094, and F4-028 (co-published as a single document), dated May 10, 2013.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
