Airworthiness Directive · Amendment 39-17449 · Landing gear
Bombardier, Inc. Airplanes
This AD applies to Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, certificated in any category, serial numbers 7003 through 7990 inclusive, and 8000 through 8999 inclusive.
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by reports of two in-service incidents where the left main landing gear (MLG) failed to extend. This AD requires installing stopper plates on the aft uplock frames in the MLG bay adjacent to the right and left MLG uplock assemblies. We are issuing this AD to prevent incorrect installation of the upper bolt in the MLG uplock assembly, which could prevent the MLG from extending and could adversely affect the safe landing of the airplane.
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Within 5,500 flight hours or 48 months after the effective date of this AD, whichever occurs first: Install stopper plates on the aft uplock frame of both the right and left MLG uplock assemblies, in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 601R-32-109, Revision A, dated February 26, 2013.
