Airworthiness Directive · Amendment 39-16277 · Fuel
McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F Airplanes
This AD applies to McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F airplanes; certificated in any category.
We are adopting a new airworthiness directive (AD) for certain Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F airplanes. This AD requires a one-time installation of electrical bonding jumpers for the fill valve controllers of fuel tanks. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent point-of-contact arcing or filament heating damage in the fuel tanks, which could result in fuel tank explosions and consequent loss of the airplane.
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Within 60 months after the effective date of this AD, install electrical bonding jumpers for the fill valve controllers of the fuel tanks, in accordance with the Accomplishment Instructions of Boeing Service Bulletin DC10-28-249, Revision 1, dated November 6, 2008 (for Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, and MD-10-30F airplanes); or Boeing Service Bulletin MD11-28-135, Revision 1, dated November 6, 2008 (for Model MD-11 and MD-11F airplanes).
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
