Airworthiness Directive · Amendment 39-15946 · Fire protection
Airbus Model A330-201, -202, -203, -223, -243, -301, -302, -303, -321, -322, -323, -341, -342, and -343 Series Airplanes
This AD applies to Airbus Model A330-201, -202, -203, -223, -243, -301, -302, -303, -321, -322, -323, -341, -342, and -343 series airplanes, certificated in any category; having serial numbers 0845, 0850, 0851, 0852, 0853, 0854, 0855, 0857, 0858, 0859, 0860, 0861, 0862, 0863, 0865, 0866, 0867, 0868, 0869, 0871, 0873, 0875, 0876, 0877, 0879, 0881, 0882, 0883, 0884, 0885, 0887, 0888, 0889, 0890, 0892, 0893, 0895, 0896, 0898, 0899, 0900, 0901, 0903, 0904, 0905, 0906, 0907, 0908, 0909, 0911, 0913, 0914, 0915, 0916, 0918, 0919, 0920, 0922, 0923, and 0951.
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Unless already done, do the following actions:
(1) Within 900 flight hours after the effective date of this AD, perform a general visual inspection to detect any wrong orientation of the lugs of the fire extinguisher bottle nut assembly of both engines, and do all applicable corrective actions specified in paragraphs (f)(1)(i) and (f)(1)(ii) of this AD, in accordance with the Accomplishment Instructions of Airbus Mandatory Service Bulletin A330-26-3043, dated October 7, 2008.
(i) Before further flight, if the correct nut assembly is available, replace the fire extinguisher bottle nut assembly.
(ii) Before further flight, if the correct nut assembly is not available, do the temporary repair; and within 900 flight hours after doing the repair, replace the fire extinguisher bottle nut assembly with the correct one.
(2) Submit a report of the findings of the inspection required by paragraph (f)(1) of this AD using Appendix 01 of Airbus Mandatory Service Bulletin A330-26-3043, dated October 7, 2008, at the applicable time specified in paragraph (f)(2)(i) or (f)(2)(ii) of this AD. Send the report to Airbus Department SEEE6, Airbus Customer Services Directorate, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex France, Attn: SDC32 Technical Data and Documentation Services; fax 33 5 61 93 28 06; e-mail sb.reporting@airbus.com.
(i) If the inspection was done on or after the effective date of this AD: Submit the report within 30 days after the inspection.
(ii) If the inspection was accomplished prior to the effective date of this AD: Submit the report within 30 days after the effective date of this AD.
Note 1: This AD differs from the MCAI and/or service information as follows: No differences.
