Airworthiness Directive · Amendment 39-15631 · Boeing Model 737-600, -700, -700C, -800, -900, and -900ER Series Airplanes
Boeing Model 737-600, -700, -700C, -800, -900, and -900ER Series Airplanes
This AD applies to Boeing Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes, certificated in any category; line numbers 1 through 2196 inclusive.
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD requires replacing the pushrods for the left and right elevator tab control mechanisms with new, improved pushrods. This AD results from a report of a rod end fracture on a rudder power control unit (PCU) control rod, which is similar to the ones used for the elevator tab pushrods. Analysis revealed that the fractured rod end had an incorrect hardness, which had probably occurred during the manufacture of the control rod. We are issuing this AD to prevent fracture of the elevator tab pushrod ends, which could result in excessive in-flight vibrations of the elevator tab, possible loss of the elevator tab, and consequent loss of controllability of the airplane.
Comply with this AD within the compliance times specified, unless already done.
At the time specified in paragraph 1.E., “Compliance,” of Boeing Special Attention Service Bulletin 737-27-1284, dated November 28, 2007; except, where the service bulletin specifies a compliance time after the date on the service bulletin, this AD requires compliance within the specified compliance time after the effective date of this AD: Replace the pushrods for the left and right elevator tab control mechanisms with new, improved pushrods by doing all the actions in accordance with the Accomplishment Instructions of Boeing Special Attention Service Bulletin 737-27-1284, dated November 28, 2007.
As of the effective date of this AD, no person may install a pushrod assembly, part number 65-45166-24, on any airplane.
