Airworthiness Directive · Amendment 39-15447 · Flight controls
Pacific Aerospace Corporation, Ltd. Models FU24-954 and FU24A-954 Airplanes
This AD applies to models FU24-954 and FU24A-954 airplanes, all serial numbers, certificated in any category.
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Unless already done, do the following actions:
(1) Within the next 50 hours time-in-service (TIS) after April 30, 2008 (the effective date of this AD), inspect the pushrod ends on the aileron and elevator control pushrods part number (P/N) 08-24015-1 following Pacific Aerospace Limited Service Bulletin No. PACSB/FU/091, Issue 2, dated November 12, 2007. Repetitively inspect thereafter at intervals not to exceed 150 hours TIS.
(2) Before further flight after any inspection where any rivets are found on aileron and elevator control pushrods P/N 08-24015-1 that have detectable play between the pushrod and the insert or evidence of working rivets, replace the rivets following Pacific Aerospace Limited Service Bulletin No. PACSB/FU/091, Issue 2, dated November 12, 2007.
Note: This AD differs from the MCAI and/or service information as follows: No differences.
