Airworthiness Directive · Amendment 39-15332 · Navigation
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 and ERJ 190 Airplanes
This AD applies to EMBRAER Model ERJ 170-100 LR, -100 STD, -100 SE, -100 SU, -200 LR, -200 STD, and -200 SU airplanes, certificated in any category, as identified in EMBRAER Service Bulletin 170-34-0019, dated February 26, 2007; and Model ERJ 190-100 STD, -100 LR, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes; certificated in any category, as identified in EMBRAER Service Bulletin 190-34-0009, Revision 01, dated October 9, 2007.
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Within 18 months after the effective date of this AD, unless already done, remove the wiring connections from pins 51 and 52 in the electrical connectors of both IRUs, in accordance with the Accomplishment Instructions of EMBRAER Service Bulletin 170-34-0019, dated February 26, 2007; or 190-34-0009, Revision 01, dated October 9, 2007; as applicable. Actions done before the effective date of this AD in accordance with EMBRAER Service Bulletin 190-34-0009, dated February 26, 2007, are considered acceptable for compliance with the requirements of this AD.
Note: This AD differs from the MCAI and/or service information as follows: No differences.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
