Airworthiness Directive · Amendment 39-15328 · Learjet Model 45 Airplanes
Learjet Model 45 Airplanes
This AD applies to Learjet Model 45 airplanes, certificated in any category; serial numbers (S/Ns) 45-002 through 45-302 inclusive, and S/Ns 45-2001 through 45-2049 inclusive.
The FAA is adopting a new airworthiness directive (AD) for certain Learjet Model 45 airplanes. This AD requires revising the Airworthiness Limitations section of the airplane maintenance manual to incorporate certain inspections and compliance times to detect fatigue cracking of certain principal structural elements (PSEs). This AD results from new and more restrictive life limits and inspection intervals for certain PSEs. We are issuing this AD to ensure that fatigue cracking of various PSEs is detected and corrected; such fatigue cracking could adversely affect the structural integrity of these airplanes.
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Note 1: This AD requires revisions to certain operator maintenance documents to include new inspections. Compliance with these inspections is required by 14 CFR 91.403(c). For airplanes that have been previously modified, altered, or repaired in the areas addressed by these inspections, the operator may not be able to accomplish the inspections described in the revisions. In this situation, to comply with 14 CFR 91.403(c), the operator must request approval for an alternative method of compliance (AMOC) according to paragraph (g) of this AD. The request should include a description of changes to the required inspections that will ensure the continued damage tolerance of the affected structure. The FAA has provided guidance for this determination in Advisory Circular (AC) 25.1529-1.
Within 30 days after the effective date of this AD, revise the ALS of the airplane maintenance manual (AMM) to include new life limits and inspection intervals according to a method approved by the Manager, Wichita Aircraft Certification Office (ACO), FAA. Incorporating the applicable chapters specified in paragraph (f)(1) or (f)(2) of this AD in the AMM is one approved method for doing the revision. Accomplishing the revision in accordance with a later approved revision of the applicable maintenance manual is an acceptable method of compliance if the revision is approved by the Manager, Wichita ACO, FAA. Thereafter, no alternative life limits or inspection intervals may be used for the affected PSEs, unless the limit or interval is part of a later approved AMM revision or the limit or interval is approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (g) of this AD.
(1) For Learjet Model 45 airplanes, S/Ns 45-002 through 45-302 inclusive: Chapter 4 of the Learjet 45 Maintenance Manual, Revision 38, dated April 24, 2006.
(2) For Learjet Model 45 airplanes, S/Ns 45-2001 through 45-2049 inclusive: Chapter 4 of the Learjet 40 Maintenance Manual, Revision 6, dated April 24, 2006.
Note 2: After an operator complies with the requirements of paragraph (f) of this AD, that paragraph does not require that operators subsequently record accomplishment of those requirements each time an action is accomplished according to that operator's FAA-approved maintenance inspection program.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
