Airworthiness Directive · Amendment 39-15263 · Main rotor system
Bell Helicopter Textron Canada Model 206A and 206B Helicopters
This AD applies to Model 206A and 206B helicopters, up to and including serial number 3216, with a main rotor latch bolt, part number 206-010-169-001, 206-010-169-003, or 206-011-122-003, certificated in any category.
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada (BHTC) Model 206A and 206B helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority to identify and correct an unsafe condition on an aviation product. The aviation authority of Canada, with which we have a bilateral agreement, states in the MCAI:
Within 30 days, remove from service each main rotor latch bolt that has a P/N that is included in the applicability of this AD and replace it with an airworthy bolt.
None.
The following information also applies to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, Rotorcraft Directorate, Safety Management Group, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Sharon Miles, Aviation Safety Engineer, Regulations and Guidance Group, Fort Worth, Texas 76193-0111, telephone (817) 222-5122, fax (817) 222-5961.
(2) Airworthy Product: Use only FAA approved corrective actions. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent) if the State of Design has an appropriate bilateral agreement with the United States. You are required to assure the product is airworthy before it is returned to service.
(3) Reporting Requirements: For any reporting requirement in this AD, under the provisions of the Paperwork Reduction Act, the Office of Management and Budget (OMB) has approved the information collection requirements and has assigned OMB Control Number 2120-0056.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
