Airworthiness Directive · Amendment 39-15250 · Flight controls
Bombardier Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 Airplanes
This AD applies to Bombardier Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 airplanes; certificated in any category; serial numbers 003 through 611 inclusive.
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Unless already done, do the following actions.
(1) Within 12 months after the effective date of this AD: Carry out a one-time inspection of the left- and right-hand elevator spring tab mechanism hardware for correct installation according to the Accomplishment Instructions of Bombardier Service Bulletin 8-27-106, dated February 7, 2006.
(2) If any hardware is found incorrectly installed during the inspection required by paragraph (f)(1) of this AD, prior to further flight, install new hardware according to the Accomplishment Instructions of Bombardier Service Bulletin 8-27-106, dated February 7, 2006.
Note: This AD differs from the MCAI and/or service information as follows: No differences.
