Airworthiness Directive · Amendment 39-15037 · Flight controls
APEX Aircraft Model CAP 10 B Airplanes
This AD applies to Model CAP 10 B airplanes, serial numbers 001 through 282, fitted with major change 000302 (wood-carbon wings), that are certificated in any category.
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Unless already done, do the following actions:
(1) Within the next 50 hours time-in-service after June 4, 2007 (the effective date of this AD), inspect the wire routing for the proper location and attachment of the connectors as detailed in the accomplishment instructions of APEX Aircraft Mandatory Service Bulletin No. 050605, dated October 17, 2006.
(2) Before further flight, if a defect or discrepancy is found during the inspection in paragraph (f)(1) of this AD, modify the wire bundle and connectors routing as detailed in the accomplishment instructions of APEX Aircraft Mandatory Service Bulletin No. 050605, dated October 17, 2006.
Note: This AD differs from the MCAI and/or service information as follows: No differences.
