Airworthiness Directive · Amendment 39-14860 · Stemme GmbH & Co. KG Model S10, S10-V, and S10-VT Gliders
Stemme GmbH & Co. KG Model S10, S10-V, and S10-VT Gliders
This AD applies to the following model and serial number gliders, certificated in any category.
| Models | Serial Nos. |
|---|---|
| S10 | 10-03 through 10-56. |
| S10-V | 14-001 through 14-030 and all converted variants 14-003M through 14-056M. |
| S10-VT | 11-001 through 11-100. |
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Prior to further flight as of January 10, 2007 (the effective date of this AD), unless already done, do the following actions.
(1) Inspect both sides of the connection between the wing and the fuselage to identify any installed brass hose connector having design modification index 01.a.
(2) Replace connectors identified as design modification index 01.a with the modified version of connectors having design modification index 02.a.
(3) Do the actions required in this AD in accordance with the requirements of Stemme F&D Service Bulletin A31-10-077 Am.-Index: 01.a, dated October 6, 2006.
Note: This AD differs from the MCAI and/or service information as follows: No differences.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
