Airworthiness Directive · Amendment 39-14741 · Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-145XR Airplanes
Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-145XR Airplanes
This AD applies to EMBRAER Model EMB-145XR airplanes, certificated in any category; as identified in EMBRAER Service Bulletin 145-27-0113, dated December 6, 2005.
The FAA is adopting a new airworthiness directive (AD) for certain EMBRAER Model EMB-145XR airplanes. This AD requires modification of the flap system interface wiring. This AD results from a finding that the aural and visual warnings, which should be activated when the flaps are set to 22 degrees during takeoff, were not enabled during the manufacture of certain Model EMB-145XR airplanes. We are issuing this AD to prevent overrunning the runway during takeoff.
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Within 2,500 flight hours after the effective date of this AD, modify the flap system interface wiring, by accomplishing all of the actions specified in the Accomplishment Instructions of EMBRAER Service Bulletin 145-27-0113, dated December 6, 2005.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
