Airworthiness Directive · Amendment 39-14671 · McDonnell Douglas Model DC-9-31, DC-9-32, DC-9-32F, DC-9-33F, DC-9-34, and DC-9-34F Airplanes; and Model DC-9-40 and DC-9-50 Series Airplanes
McDonnell Douglas Model DC-9-31, DC-9-32, DC-9-32F, DC-9-33F, DC-9-34, and DC-9-34F Airplanes; and Model DC-9-40 and DC-9-50 Series Airplanes
This AD applies to McDonnell Douglas Model DC-9-31, DC-9-32, DC-9-32F, DC-9-33F, DC-9-34, DC-9-34F, DC-9-41, and DC-9-51 airplanes, certificated in any category; as identified in Boeing Service Bulletin DC9-28-214, dated December 16, 2005.
The FAA is adopting a new airworthiness directive (AD) for certain transport category airplanes, identified above. This AD requires installing a bonding jumper from the boost pump volute to the fuel tank structure, and related investigative/corrective actions. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent point-contact arcing or filament heating in the fuel tank, which, in the event of a short or ground fault inside the fuel tank, could result in a fuel tank explosion and consequent loss of the airplane.
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Within 60 months after the effective date of this AD, install a bonding jumper from the boost pump volute to the fuel tank structure, and do all applicable related investigative and corrective actions before further flight; by doing all the actions specified in the Accomplishment Instructions of Boeing Service Bulletin DC9-28-214, dated December 16, 2005.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
