Airworthiness Directive · Amendment 39-14544 · The Boeing Company Airplanes
The Boeing Company Airplanes
This AD applies to The Boeing Company 727-100 Series, 727-100C Series, 727-200 Series, 727 Series, 727C Series.
The models as the FAA's AD index lists them. The serial ranges, installed parts and exceptions are in the AD itself: read it at the FAA.
The FAA is adopting a new airworthiness directive (AD) for certain Boeing transport category airplanes. This AD requires determining if the terminal fittings of the spars of the wings are made of 7079 aluminum alloy material. For any positive finding, the AD requires doing repetitive inspections for cracks and corrosion of all exposed surfaces of the terminal fitting bores; doing repetitive inspections for cracks, corrosion, and other surface defects, of all exposed surfaces, including the flanges, of the terminal fitting; applying corrosion inhibiting compound to the terminal fittings; and repairing or replacing any cracked, corroded, or defective part with a new part. This AD also provides for an optional terminating action for the repetitive inspections. This AD results from reports of cracking of the terminal fittings of the spars of the wings. We are issuing this AD to detect and correct stress-corrosion cracking of the terminal fittings, which could result in the failureof one of the terminal fitting connections. Such a failure, combined with a similar failure of one of the other three terminal fittings, could result in the inability of the airplane structure to carry fail-safe loads, which could result in loss of structural integrity of the wing attachment points.
