Airworthiness Directive · Amendment 39-14255 · Dassault Model Falcon 2000EX Airplanes
Dassault Model Falcon 2000EX Airplanes
This AD applies to Dassault Model Falcon 2000EX airplanes, certificated in any category, with serial numbers 6, and 28 and subsequent; except those on which Dassault Aviation Modification F2000EX M2675 has been done during production.
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Model Falcon 2000EX airplanes. This AD requires revising the airplane flight manual (AFM) to extend runway length limits for takeoff and landing. This AD also provides for an optional terminating action for the AFM revision. This AD results from an event in which braking efficiency was temporarily lost during landing, but was recovered after the flightcrew fully released and then reapplied the brakes. We are issuing this AD to prevent a runway overrun in the event of loss of braking function, which could result in injury to passengers or flightcrew and damage to the airplane.
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Within 10 days after the effective date of this AD: Revise the Limitations and Performance sections of Dassault Falcon EASy F2000EX AFM, DGT88898, to include the information in Dassault Temporary Change (TC) 17, dated July 26, 2005, as specified in the TC. The TC includes procedures for extending runway length limits for takeoff and landing. Operate the airplane according to the limitations and procedures in the TC.
Note 1: This may be done by inserting a copy of Dassault TC 17 in the AFM. When the TC has been included in the general revisions of the AFM, the general revisions may be inserted in the AFM, provided the relevant information in the general revision is identical to that in Dassault TC 17.
Modifying the wiring that links the inertial reference system and the brake system control unit, in accordance with Dassault Service Bulletin F2000EX-80, dated May 11, 2005, ends the requirements for the AFM revision required by paragraph (f) of this AD. After accomplishing the modification, Dassault TC 17, dated July 26, 2005, may be removed from the AFM.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft