Airworthiness Directive · Amendment 39-14078 · Airbus Model A310 Series Airplanes
Airbus Model A310 Series Airplanes
This AD applies to all Airbus Model 310 series airplanes, certificated in any category.
The FAA is adopting a new airworthiness directive (AD) for all Airbus Model A310 series airplanes. This AD requires measuring the clearance between the compensator and the guide assembly of probe no. 1 on the outboard fuel tanks, and performing corrective actions if necessary. This AD is prompted by the results of fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent interference between the compensator and the guide assembly of probe no. 1, which could create an ignition source that could result in a fire or explosion.
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Within 4,000 flight hours after the effective date of this AD, measure the clearance between the compensator and the guide assembly of probe no. 1 on the left- and right-hand outboard fuel tanks, in accordance with the Accomplishment Instructions of Airbus Service Bulletin A310-28-2152, dated January 12, 2004. If the clearance between the compensator and the guide assembly is less than 3 mm, before further flight, modify the guide assembly of probe no. 1 to provide clearance of 3 mm or more between the compensator and the guide assembly, in accordance with the Accomplishment Instructions of the service bulletin.
As of the effective date of this AD, no person may install probe no. 1 on the left-or right-hand outboard fuel tank unless the requirements of paragraph (f) of this AD have been accomplished.
