Airworthiness Directive · Amendment 39-14058 · CENTRAIR 101 Series Gliders
CENTRAIR 101 Series Gliders
This AD affects Models 101, 101A, 101AP, and 101P gliders, serial numbers as specified below, that are certificated in any catergory:
(1) Serial numbers 101A600 through 101A637 where the original manufacturer's hinge pins are installed; and
(2) All gliders that had hinge pins replaced with hinge pins that Centrair delivered between February 20, 1995, and February 28, 2001.
This document incorporates corrections to clarify the intent of Airworthiness Directive (AD) 2005-08-06, which was published in the Federal Register on April 19, 2005 (70 FR 20271). AD 2005-08-06 applies to all CENTRAIR 101 series gliders. This action clarifies the applicability to point out that the affected hinge pins were installed at manufacturer on serial numbers 101A600 through 101A637 and could be replaced on other serial number gliders with hinge pins that Centrair delivered between February 20, 1995, and February 28, 2001. We are re- issuing the AD in its entirety to help eliminate any confusion that this AD may have created.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
