Airworthiness Directive · Amendment 39-13379 · McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F, DC-10-30F (KC10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F Airplanes
McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F, DC-10-30F (KC10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F Airplanes
Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F, DC-10-30F (KC10A and KDC-10), DC-10-40, DC-10-40F, MD-10- 10F, and MD-10-30F airplanes; as listed in Boeing Alert Service Bulletin DC10-27A233, Revision 01, dated June 6, 2002; and Model MD- 11 and MD-11F airplanes; as listed in Boeing Alert Service Bulletin MD11-27A080, Revision 01, June 6, 2002; certificated in any category.
This amendment adopts a new airworthiness directive (AD), applicable to certain McDonnell Douglas Model DC-10-10, DC-10-10F, DC- 10-15, DC-10-30, DC-10-30F, DC-10-30F (KC10A and KDC-10), DC-10-40, DC- 10-40F, MD-10-10F, MD-10-30F, MD-11, and MD-11F airplanes, that requires a one-time inspection to determine the thickness of the walls of the rudder pedal arm assembly for the captain's and first officer's rudder pedals, and follow-on actions. This action is necessary to prevent failure of the rudder pedal arm assembly, which, under certain conditions, could result in reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
