Airworthiness Directive · Amendment 39-13236 · Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes

AD 2003-14-17

Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes

SupersededAirplane

Superseded. A later AD replaced this one: AD 2006-10-01. Comply with the one in force.

Published: July 18, 2003
Effective: August 22, 2003
Maker: Bombardier, Inc. (Formerly Canadair)
Supersedes: Nothing

Applies to

Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, as listed in Bombardier Alert Service Bulletin A601R-26- 017, Revision `A,' dated September 8, 2000; certificated in any category.

The FAA's summary

This amendment adopts a new airworthiness directive (AD), applicable to certain Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, that requires the installation of protective tape on the fire and overheat control unit located in the flight compartment. The actions specified by this AD are intended to prevent fluid contamination inside the fire and overheat control unit, which could result in a false fire alarm and consequent emergency landing. This action is intended to address the identified unsafe condition.

Filed under

The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.

Aircraft

Canadair Canadair CL-600-2B16 Canadair CL-600 Canadair CL-600-2A12 Canadair CL-600-2B19 Canadair CL-600-1A11

Official sources

The Federal Register document · document 03-17816, the legal text
FAA Dynamic Regulatory System (DRS) · search 2003-14-17 for its current status and any corrections