Airworthiness Directive · Amendment 39-13146 · Rolls-Royce plc RB211 Series Turbofan Engines
Rolls-Royce plc RB211 Series Turbofan Engines
This AD is applicable to Rolls-Royce plc (RR) RB211-524C2-19 and RB211-524C2-B-19 series turbofan engines. These engines are installed on, but not limited to Boeing 747 airplanes.
The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce plc (RR) RB211-524C2-19 and RB211-524C2-B-19 series turbofan engines. This AD requires replacing the existing low pressure (LP) compressor location bearing assembly, intermediate pressure (IP) compressor location bearing, IP compressor bearing support housing, IP compressor rear stub shaft, LP compressor location bearing support, oil transfer connector assembly, hydraulic oil seal housing, and hydraulic oil seal with improved design parts. This AD is prompted by statistical analysis by the manufacturer of in-service premature bearing failures. The actions specified in this AD are intended to prevent LP compressor failure and uncontained disc failures, resulting in damage to the airplane.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Engines
