Airworthiness Directive · Amendment 39-13122 · Aerospatiale Model ATR42-500 Series Airplanes, and Model ATR72-102, -202, -212, and -212A Series Airplanes
Aerospatiale Model ATR42-500 Series Airplanes, and Model ATR72-102, -202, -212, and -212A Series Airplanes
Model ATR42-500 series airplanes, and Model ATR72-102, -202, -212, and -212A series airplanes; certificated in any category; except those airplanes on which ATR Modification 5117 or 5322 (reference Avions de Transport Regional Service Bulletin ATR42-25-0134, dated January 24, 2002; or Avions de Transport Regional Service Bulletin ATR72-25-1074, dated January 24, 2002; as applicable) has been installed.
This amendment adopts a new airworthiness directive (AD), applicable to certain Aerospatiale Model ATR42-500 series airplanes, and Model ATR72-102, -202, -212, and -212A series airplanes, that requires replacement of insulation blankets constructed of metallized polyethyleneteraphthalate (MPET) located from sections 11 through 16 of the fuselage with new insulation blankets constructed of Terul 18<SUP>TM</SUP>. This amendment is prompted by reports of in-flight and ground fires on certain airplanes manufactured with insulation blankets constructed of MPET, which may contribute to the spread of a fire when ignition occurs from small ignition sources such as electrical arcing or sparking. The actions specified by this AD are intended to ensure that insulation blankets constructed of MPET are removed from the fuselage. Such insulation blankets could propagate a small fire that is the result of an otherwise harmless electrical arc and could lead to a much larger fire. This action is intended to address the identified unsafe condition.
