Airworthiness Directive · Amendment 39-9361 · General Electric Company (GE) CF6-45, -50, -80A, -80C2, and -80E1 Turbofan Engines
General Electric Company (GE) CF6-45, -50, -80A, -80C2, and -80E1 Turbofan Engines
This airworthiness directive (AD) is applicable to GE CF6-45, -50, -80A, -80C2, and -80E1 turbofan engines with high pressure compressor rotor (HPCR) stage 3-9 spools with part numbers (P/N's) listed in the following Table 1 installed: Table 1 Engine model HPCR stage 3-9 spool P/N CF6-45/50 Series Engines............... 9136M89G02, 9136M89G03, 9136M89G06, 9136M89G07, 9136M89G08, 9136M89G09, 9136M89G17, 9136M89G18, 9136M89G19, 9136M89G21, 9136M89G22, 9136M89G27, 9136M89G29, 9253M85G01, 9253M85G02, 9273M14G01, 9331M29G01. CF6-80A Series Engines................. 9136M89G10, 9136M89G11, 9136M89G20, 9136M89G21, 9136M89G22, 9136M89G27, 9136M89G28 CF6-80C2 Series Engines................ 1333M66G01, 1333M66G03, 1333M66G07, 1333M66G09, 1333M66G10, 1781M52P01, 1781M52P02, 1781M53G01, 1781M53G02 1781M53G03, 1781M53G04, 1781M53G05, 1781M53G06, 1781M53G07, 1781M53G08, 1781M53G09, 1781M53G10, 1854M95P01, 1854M95P02, 1854M95P03, 1854M95P04, 1854M95P05, 1854M95P06, 1854M95P07, 1854M95P08, 9380M28P05. CF6-80E1 Series Engines................ 1669M22G01, 1669M22G03, 1782M22G01, 1782M22G02, 1782M22G04. These engines are installed on, but not limited to, Airbus A300, A310, and A330 series, Boeing 747 and 767 series, and McDonnell Douglas DC-10 and MD-11 series airplanes.
This amendment supersedes three existing airworthiness directives (AD's), that are applicable to GE CF6-45, -50, -80A, -80C2, and -80E1 turbofan engines. Those AD's currently require specific handling of the GE CF6 series high pressure compressor rotor (HPCR) stage 3-9 spools during a fluorescent penetrant inspection process, and initial and repetitive ultrasonic and eddy current inspections of certain HPCR stage 3-9 spools for cracks. This amendment removes the AD that requires special handling of the spools during fluorescent- penetrant inspection, and adjusts and combines the initial and repetitive inspection requirements, currently listed in two AD's, into one AD for the HPCR stage 3-9 spool. This amendment aligns repetitive inspection requirements with the more stringent initial inspection requirements mandated by AD 2000-16-12, Amendment 39-11868 (65 FR 50623, August 21, 2000) and terminates AD 95-18-14, Amendment 39-9361 (60 FR 46216, September 6, 1995) that is no longer necessary. The actions specified by this AD are intended to prevent cracks, which can cause separation of the HPCR stage 3-9 spool and possible uncontained engine failure.
